Cool Large Spaces Fast—Reliable, Portable, and Built for Tough Jobs
The Climate Pro K24E is a heavy-duty portable air conditioner designed for industrial, commercial, and temporary cooling applications. It delivers targeted cooling using ducted airflow, making it ideal for environments where central HVAC systems are unavailable or insufficient.
With a high-capacity rotary compressor, strong airflow, and extended duct capability, this unit is built to perform in warehouses, server rooms, construction zones, and emergency cooling situations.
Its plug-and-play 208/230V power setup and programmable controls make it simple to deploy and operate—no complex installation required.
- Quickly cools large areas with 24,000 BTU capacity
- Moves cold air exactly where you need it
- Handles hot, humid job sites with ease
- Portable design—roll it in, plug it in, start cooling
Key Features
- 24,000 BTU cooling power for large rooms and workspaces
- Programmable control panel for easy operation
- High airflow performance up to 660 CFM (evaporator)
- Long duct reach for flexible installation
- R-32 refrigerant for improved efficiency
- Auto restart & safety protections for reliable operation
- Built-in condensate tank with optional pump compatibility
- Durable construction for commercial and industrial use
Additional Specifications
| NEMA Plug Configuration | 6-20 - See Chart Here |
| MovinCool Climate Pro K24e Product Brochure |  |
| MovinCool Climate Pro K24e Owner's Manual |  |
| NOTE: All specifications subject to change without notice. All models feature compressor overload relay and fan motor protection. All models feature compressor short-cycle protection, return air thermostat, automatic restart and accommodate a condensate pump kit. All models are 50 Hertz (Hz) compatible with a slight performance decrease from the specifications listed above. |
|
MovinCool Climate Pro K-24 Installation and Accessory List
All accessories are sold separately.
All accessories are sold individually unless otherwise noted.
Exhaust duct required in most cases.
1. Quick Connect Two Hole Adapter/Flange Base Plate - 481170-0480
Base Plate has two 5-inch diameter Quick Connect holes with molded flanges. Includes wire clamp and mounting screws.
(Use with #2 quick connect nozzle(s).)
2. Quick Connect Nozzle Kit - 484209-0480
5-inch diameter Quick-Connect Nozzle extends up to 2-ft in length. Includes trim ring.
(Use with #1 quick connect adapter/flange base plate.)
3. Two Hole Base Plate - 481769-0280
Base plate has two 5-inch diameter holes to convert the airflow from factory-installed louvers to nozzles or air ducts.
4. Supply Air Flange Kit - 481170-0450
5-inch diameter flange kit includes wire clamp and mounting screws. (Used to attach the self-supported cold air duct to the two-hole base plate.)
5. Self-Supported Cold Air Duct - LA481744-0420
5-inch diameter self-supported duct extends from 6.5-ft to 10-ft in length. Provides specific, directional airflow.
6. Trim-Ring - 481851-0200
5-inch diameter Trim Ring mounts on the end of the self-supported duct.
(Not required, but the trim ring prevents sharp edges and/or unraveling and completes the look.)
7. Outdoor Air (Heat Exchanger) Plenum - 484350-1170
For Negative Pressure Rooms - When balanced airflow is required, attached the outdoor heat exchanger plenum with a 12-inch diameter duct from the side of the unit to an outside air source. The air to the outdoor heat exchanger is pulled from outside the room to eliminate problems associated with negative pressure. It attaches to the condenser intake side of the unit and is hinged for filter cleaning.
(Use with 12-inch Self-Supported Duct #8 or 12-inch Flexible Duct #10.)
8. Self-Supported Warm Air Duct / Negative Pressure Condenser Intake Air Duct - LA481744-0410
12-inch diameter Self-Supported Exhaust Duct extends up to 10-ft in length.
(Used as a warm air exhaust duct or intake duct with negative pressure air plenum.)
9. Ceiling Tile Exhaust Kit - HDK-12
MovinCool makes it easy to remove exhaust air. Simply replace your existing ceiling tile with the HDK-12 Ceiling Tile Exhause Kit. Place the Exhaust Flex Duct on top of the MovinCool unit and insert it into the specially cut ceiling tile.
Includes 1) 2-ft x 2-ft Ceiling Tile with 8-ft of 12-inch diameter Flexible Exhaust Duct.
10. Flexible Duct – LAY45771-0060 (not pictured)
12-inch diameter x 8-ft Flexible Air Duct. Can be used in place of Self-Supported duct.
11. Condensate Pump 230V - 484789-0220
No need to bother with manually emptying the tanks. The condensate pump will remove the water automatically to any remote drain. Maximum lift – 17-ft. Includes 3/8-inch diameter x 20-ft length drainage hose + installation hardware.
12. Storage Cover - LA484420-0690
When your MovinCool Portable Spot Cooler is not in use, protect it with this durable black nylon oxford unit storage cover.
