MARK-10 Annual Filter Kit

All Replacement Filters for One (1) Year

FK-M10

MARK - 10 | Annual Filter Kit - All Replacement Filters for One Year - Pure n Natural Systems
Mark Series Promo - LOOP.mp4__PID:baa9eba4-ba5f-44e4-a3a5-fe5a76a2b210

MARK-10 Annual Filter Kit

All Replacement Filters for One (1) Year

FK-M10

Translation missing: en.product.general.sale_price $499.99

Usually ships in 5 days; up to 10 for some models

Free Shipping

Free Shipping

Bulk order? Request a quote

30-Day Money-Back Promise

About this product

Changing the filters in your MARK-10 Ceiling Mount Air Filtration System - Smoke Eater on a regular basis is required to maintain the health of the unit

Each filter kit includes;

  • (12) - 1/2" Tackified Pre-Filters - Change Monthly
  • (6) - 1/2" Carbon Filter Pads - Change Every 2 Months
  • (1) - 12" High Efficiency Filter - Change Annually

Pre-Filters - 12 Polyester pre filters are supplied with each system. The pre-filter is changed monthly and removes larger particles such as lint, hair, dust, and pollen. The pre-filter is important because not only does it remove the larger particles, it also helps prolong the life of the High Efficiency filter in the system. Essentially, the pre-filter is the first line of defense in maintaining your system; therefore promoting better indoor air quality.
Pre-filters cannot be washed and must be changed monthly.

Activated Carbon Filter Pads - 6 Activated Carbon Filters pads are supplied with each system. The activated carbon filter is changed every two months and removes odors by absorbing the odor molecules into the filter. Since the activated carbon can only absorb a certain amount of molecules, it will begin releasing the trapped molecules, once it is full, back into the air if not properly maintained.
The Carbon Filters cannot be washed and should be changed every 2 months.

High Efficiency Filter - 1 - 12" High Efficiency Filter is supplied with each Mark-10 Air Cleaner and should be changed once per year. The High Efficiency filter removes the very small particles, such as smoke (tobacco, burning wood, oil, rosin), dust mites, spores, mold spores, pollen, spray paint, spray paint dust, ashes, cement dust, auto emissions, textile fibers, fiberglass, hairspray, insecticide dust, copier toner and most viruses just to name a few. As you can see, the High Efficiency filter is an extremely important filter and when used and maintained properly will dramatically improve your indoor air quality. We cannot stress enough the importance of the High Efficiency filter to our system and the fact the High Efficiency filter must be maintained in order to achieve the maximum results.
The High Efficiency filter cannot be washed and should be changed annually.

Replacement Annual Filter Kit for MARK-10 Ceiling Mount Air Filtration System - Smoke Eater

Best for

  • Keeps your MARK-10 air cleaner running at peak performance.
  • Replaces the filters you’ll need over a full year.
  • Helps maintain cleaner air by removing smoke, odors, dust, and other particles.
  • Makes your servicing routine straightforward (one kit covers all filter changes for the year).
  • Helps protect your equipment and indoor air quality, which is essential for commercial spaces (cigar lounges, HVAC, manufacturing, etc.).

Specifications

What's in the box

Complete annual filter set for the MARK-10 Air Cleaner

  • (12) Pre-filter
  • (6) Activated carbon filter pads
  • (1) High Efficiency filter
  • Manufacturer-recommended replacement schedule
  • Basic installation instructions

Installation tips

General Access

  • The intake door is located closest to the HI/OFF/LO switch. Remove the pins and grill to access the filters.

Pre-Filters

  • Replace every 3–4 weeks on average.
  • Do NOT wash pre-filters.
  • Peel away the dirty pre-filter and discard it.
  • Install the new pre-filter with the white side facing out, then close the intake door.

Carbon Filters

  • Replace every ~2 months
  • Do NOT wash carbon filters.
  • Remove the pre-filter first, then pull out the old carbon filter, discard, and insert the new carbon filter behind the pre-filter.

High Efficiency Filter

  • Replace annually (once per year)
  • Do NOT wash High Efficiency filters
  • Located behind the carbon layer
  • Remove and discard the old filter; slide the new filter fully into place

Additional Tips

  • Filter life varies depending on smoke levels, the number of users, and airflow conditions.
  • Only use Pure N Natural replacement filters and parts.

Frequently asked questions

How often should I replace the filters in my MARK-10?
This kit is designed for once-a-year replacement under normal use. Heavy smoke or odor environments may require more frequent changes.

Will this kit fit every MARK-10 model?
Yes. This annual filter kit is designed specifically for the MARK-10 Commercial Air Cleaner.

Can I replace the filters myself?
Yes. The filters slide in and out easily, and no special tools are required. Just unplug the unit before servicing.

What happens if I skip an annual filter change?
Airflow and smoke-removal performance will gradually drop, and the blower may work harder than necessary. Annual replacement keeps the MARK-15 operating efficiently.

Authorized Dealer

Authorized Dealer

We are an official dealer, guaranteeing 100% authentic products backed by the brand.

Free Shipping

Free Shipping

Place your order with no extra costs. Enjoy free shipping on all purchases.

30 days Free Returns

30 days Free Returns

If it’s not what you expected, you have 30 days to return it at no additional cost.

Over 14K customers trust us

Over 14K customers trust us

More than 14,000 satisfied customers trust and recommend us.

30+ years in the market

30+ years in the market

With over 30 years of experience, we are a solid and reliable name in the market.

Unmatched Warranties.

Unmatched Warranties.

We offer unmatched warranties, designed to give you complete peace of mind with your purchase.

Members-Only Bonuses Earn 1% Back & More

Sign Up For Free