Cool tough spaces fast—industrial, warehouse, and process lines
The Climate Pro X26E is the advanced, environmentally-friendlier version of MovinCool’s renowned Climate Pro X26E spot cooler. This R‑32 refrigerant model maintains the powerful 24,000 BTU/h cooling capacity (approximately 2 tons) while enhancing operational efficiency and reducing global warming potential. Its programmable digital controls, three-speed fan, and rugged steel housing make it ideal for tough industrial and warehouse environments.
Features:
- Digital, programmable controls for customized schedules.
- Connectivity-ready—supports remote monitoring and notifications.
- Quick-connect nozzles for rapid deployment.
- Durable steel construction with bumper protection and easy mobility.
Comparison Insight
This X26E model builds upon the discontinued Climate Pro X26E (R-32) by offering environmentally improved refrigerant, slightly reduced power consumption (from ~2.7 kW to ~2.3 kW), and the same high-performance cooling capacity and industrial-grade design.
Additional Specifications
| MovinCool Climate Pro X26E Owner's Manual |
 |
| MovinCool Climate Pro X26E Product Spec Sheet |
 |
|
NOTE: *Specification information shown with 230 V. Specifications subject to change without notice. |
All models feature compressor overload relay and fan motor protection. All models also feature compressor short-cycle protection, return air thermostat, automatic restart and accommodate a condensate pump kit. All models are 50 Hertz (Hz) compatible with a slight performance decrease from the specifications listed above. |
Climate Pro X26E Installation Accessories
MovinCool Climate Pro X26E Installation and Accessory List
All accessories are sold separately.
All accessories are sold individually unless otherwise noted.
Exhaust duct required in most cases.
All MovinCool Climate Pro X-Series Spot Coolers include two 5-inch diameter Quick-Connect adjustable nozzles.
1. Quick-Connect Dual Duct – 484209-0500
Easily change the (included) 5-inch quick-connect single nozzles to dual-duct nozzles that extend up to 2-feet in length. Divide each 5-inch nozzle opening into two 4-inch outlets to multiply your cooling options.
If your application requires cooling further away from the unit than 2-feet, the following accessories are recommended.
2. Flange Kit 5-inch Diameter - MovinCool Climate Pro Series - 481170-0450
5-in diameter white metal flange with wire clamp and mounting screws. Use with supply air ducts.
3. Supply Air Flange Kit - 481170-0450
5-inch diameter flange kit includes wire clamp and mounting screws. (Used to attach the self-supported cold air duct to the two-hole base plate.)
4. Self-Supported Cold Air Duct - LA481744-0420
5-inch diameter self-supported duct extends from 6.5-ft to 10-ft in length. Provides specific, directional airflow.
5. Trim-Ring - 481851-0200
5-inch diameter Trim Ring mounts on the end of the self-supported duct.
(Not required, but the trim ring prevents sharp edges and/or unraveling and completes the look.)
6. Outdoor Air (Heat Exchanger) Plenum - 484350-1180
For Negative Pressure Rooms - When balanced airflow is required, attached the outdoor heat exchanger plenum with a 12-inch diameter duct from the side of the unit to an outside air source. The air to the outdoor heat exchanger is pulled from outside the room to eliminate problems associated with negative pressure. It attaches to the condenser intake side of the unit and is hinged for filter cleaning.
(Use with 12-inch Self-Supported Duct #7 or 12-inch Flexible Duct #9.)
7. Self-Supported Warm Air Duct / Negative Pressure Condenser Intake Air Duct - LA481744-0410
12-inch diameter Self-Supported Exhaust Duct extends up to 10-ft in length.
(Used as a warm air exhaust duct or intake duct with negative pressure air plenum.)
8. Ceiling Tile Exhaust Kit
Flexible Air Duct, 12-in dia. 12-in diameter wire-reinforced, accordion-style duct in 10-ft length for outdoor air exhaust. Includes clamp. Celling Tile, 12-in hole, plastic 24-in x 24-in plastic white tile with 12-in hole for exhaust air self-supported duct. Ceiling Tile, 12-in hole, metal 24-in x 24-in sheet metal tile with 12-in hole and built-in flange for exhaust air flexible duct kit
9. Flexible Duct – LAY45771-0060
12-inch diameter x 8-ft Flexible Air Duct. Can be used in place of the Self-Supported duct.
10. Condensate Pump 230V - 484789-0310
No need to bother with manually emptying the tanks. The condensate pump will remove the water automatically to any remote drain. Maximum lift – 17-ft. Includes 3/8-inch diameter x 20-ft length drainage hose + installation hardware.
11. Storage Cover - LA484420-0880
Durable black nylon oxford unit storage cover. Dimensions - 22-3/4 x 29-3/4 x 45-3/4 inches.
