Smoke Removal Made Simple With the Airpura T600 & T700
The Airpura T600 and T700 are purpose-built smoke air purifiers designed for heavy, continuous cigarette, cigar, pipe, hookah, and marijuana smoke. Their 3-stage system targets what smoke leaves behind—tars, chemicals, and lingering odors—using a TarBarrier pre-filter, a 26-lb activated carbon bed, and a HEPA-Barrier post filter.
The T700 delivers stronger airflow for large spaces, refreshing the air in rooms up to 1,500 sq ft about every 30 minutes. Optional wall-mount brackets help you keep units off the floor in busy or high-traffic areas.
How the 3-Stage Filtration Works
Stage 1: TarBarrier Pre-Filter
Acts like a cigarette filter, capturing sticky tars before they reach the main filters.
Replace every 6–12 months (heavy-smoke spaces may require 1–3 months).
Stage 2: 26-lb Activated Carbon Filter
A deep carbon bed adsorbs thousands of smoke-related chemicals and gases— including VOCs, benzene, toluene, and formaldehyde.
Replace every ~2 years.
Stage 3: HEPA-Barrier Post Filter
Catches fine carbon dust that may escape the carbon stage for cleaner final output air.
Replace about every 12 months.
Key Advantages of the Airpura T-Series for Heavy Smoke
Precise Airflow Control
Longer contact with the 26-lb carbon bed is what drives chemical and odor removal. Variable speed control lets you slow or increase airflow to match the level of smoke in the space.
Sealed Filtration Path
A full pressure-seal ensures all air moves through all filters—no bypass leaks. The reusable poly/wool gasket avoids glue, silicone, and rubber, reducing added contaminants.
All-Metal, 360° Housing
Powder-coated steel avoids the off-gassing that can occur with plastic housings. The perforated design supports full 360° intake and clean, even distribution of filtered air.
High-Efficiency Motor Design
A backward-curved motorized impeller delivers strong airflow with lower noise and less turbulence. Variable output up to 560 CFM provides flexibility for light, moderate, or heavy smoke loads.
Low-Emission Construction
The T-Series avoids plastic, silicone, rubber, and most adhesives; only minimal amounts required for UL/ETL/CE/CSA compliance remain. PCB-free capacitors and lead-free solder reduce additional chemical sources. Riveted assembly prevents the off-gassing associated with spot welding. A sock-style carbon liner improves airflow through the carbon bed while minimizing material use.
