The MovinCool Office Pro 36 Portable Spot Cooler Provides Reliable Cooling for Heat-Generating Equipment Including Computer Servers
Providing 36,000 BTUs per hour of cooling, the MovinCool Office Pro 36 portable spot cooler is the ideal cooling solution for servers, routers, telecom, and other heat-sensitive equipment. The Office Pro 36 features easy-to-use programmable controls allowing automatic operation after-hours or during weekends when heat can cause damage to expensive office equipment.
The MovinCool Office Pro 36 is the best portable spot cooler when the need to cool expensive equipment is necessary. It's perfect for cooling down rooms or spaces where electronics are generating excessive heat such as server rooms, telecommunication centers, data centers, and others.
Air-cooled portable air conditioners are most often the system of choice for end-users and industry professionals looking for effective spot cooling systems. The fact that air-cooled portable air conditioning units can be installed almost anywhere - usually in minutes - explains their popularity as server room air conditioners, data center air conditioners, and cooling systems for a wide range of other applications. They can be used as a Temporary Air Conditioning System as needed.
MovinCool Office Pro 36 Portable Spot Cooler Features
- Low-temperature operation ideal for cooling heat-sensitive equipment.
- "Plug and Play" condensate pump option can be installed in just minutes.
- Protected with an AFCI plug for added safety against unwanted effects of electrical arcing.
- Totally self-contained with no costly installation necessary.
- Operates automatically after-hours or during weekends with easy-to-use controls.
MovinCool Office Pro 36 Portable Spot Cooler Technical Specifications
|Cooling Capacity||36,000 BTU/h (95°F @ 60% RH)|
Programmable Control Panel
|Electrical||208 / 230V, 1 Phase | 4.3 kW | 19.6 Amps
Recommended Fuse Size - 30 Amps
Min/Max Voltage - 198 / 250
|Power Cord||12 AWG (3-core) - 6 feet|
|NEMA Plug Configuration||6-30 - See Chart Here|
|Fan Motor Output
|Evaporator - 0.210 (H) / 0.13 kW (L)
Condenser - 0.330 (H) / 0.12 kW (L)
|Evaporator||Fan Type - Centrifugal
Max Airflow - 980 CFM (H) / 825 CFM (L)
Max External Static Pressure - 0.6 IWG
|Condenser||Fan Type - Centrifugal
Max Airflow - 1490 CFM (H) / 1060 CFM (L)
Max External Static Pressure - 0.5 IWG
|Compressor||Hermetic Rotary - 2.3 kW Output|
|Refrigerant||R-410A - 2.4 lb|
|Dimensions||30" (W) x 44" (D) x 52" (H)|
|Weight||Net - 440 lbs. | Shipping - 483 lbs.|
|Condensate Tank Capacity||2 @ 5 Gallons each|
|Operating Temperature||65°F - 95°F @ 50% RH|
|Max Duct Length||Cold Duct Hose - 40 ft.
Hot Duct Hose - 60 ft.
With Condenser - 65 (H) | 62 (L)
Without Condenser - 67 (H) | 66 (L)
|MovinCool Office Pro 36 Owner's Manual|
|MovinCool Office Pro 36 Product Spec Sheet|
|What's In The Box?||
|Warranty||MovinCool's Office Pro, Classic, Classic Plus, and Climate Pro models come standard with 1-year parts and labor coverage.
Registered products are eligible to receive full 3-year parts and labor coverage including the compressor.
|NOTE: All specifications subject to change without notice.
All models feature compressor overload relay and fan motor protection.
All models feature compressor short-cycle protection, return air thermostat, automatic restart and accommodate a condensate pump kit.
All models are 50 Hertz (Hz) compatible with a slight performance decrease from the specifications listed above.
MovinCool Office Pro 36 Installation and Accessory List
Spot or Remote Cooling - This is the part of the portable spot cooler that COOLS THE AIR. To spot cool specific areas, use the nozzle adapter (1) in place of the standard louvers. Attach cold air ducts (4) or nozzles (2) to the adapter to cool remote hot spots. Trim rings (5) give a finished look and keep the ducts from unraveling.
Condenser Heat Removal - This is the part of the portable spot cooler that EXHAUSTS THE WARM AIR. The warm, humid air must exit the system somewhere... MovinCool makes removing exhaust easy. Simply replace the existing ceiling tile with the MovinCool ceiling tile kit (7). Place the flexible duct 6A, 12) on top of the unit and insert it into the ceiling tile.
Condenser Air Intake - This is where the room (warm) air goes into the portable spot cooler to be cooled. The air can be pulled without any attachments needed. However, when balanced airflow is required, attach the air plenum (8) with a duct (6, 6A) from the side of the unit to an outside air source. The air to the condenser is pulled from outside of the room to eliminate problems associated with negative air pressure.
(Accessories Sold Separately)
Exhaust duct required in most cases.
Nozzle Adapter Kit - LAY45770-0070
Three-piece metal frame converts airflow from louvers to nozzles or cold air ducts. Includes mounting screws. (Nozzles and ducts sold separately.)
1A. Duct Adapter Kit - LAY45770-0080
Same as above, but for use with cold air flexible ducts. Includes flange. (Cold air flexible ducts sold separately - Use with 4B - Cold air Self Supported Duct - LAY48510-0080)
Nozzle Kit - 484209-0050
6" diameter white plastic nozzle that extends up to 2' in length. Includes flange, mounting screws and trim ring. (Purchase in sets of two.)
Cold Air Flange Kit - 481170-0250
6" diameter white metal flange with wire clamp and mounting screws. Use with cold air ducts.
Cold Air Extension Duct - 481744-0030
6" adjustable diameter white plastic duct that extends from 6-1/2' to 10' in length.
4A. Cold Air Flexible Duct - LAY45810-0030
8" diameter wire-reinforced accordion-style duct in 25' lengths.
4B. Cold Air Self Supported Duct - LAY45810-0080
8"adjustable diameter white plastic duct that extends from 6-1/2' to 10' in length.
Trim Ring - 481851-0210
6" diameter black plastic ring mounts as end caps for extension duct.
Make-up Air Self Supported Duct - 481744-0060
12" diameter white plastic duct that extends 6-1/2' to 10' in length
6(A). Make-up Air Flexible Duct - LAY45771-0060
12" diameter wire-reinforced accordion-style duct in 10' length for make-up air. Includes clamp.
Ceiling Tile Kit (16") - GX484410-8940
(Warm/Exhaust air) 24" x 24" Metal Ceiling Tile with 16-inch diameter opening and built-in flange. Includes 7-feet of 16-inch diameter white wire-reinforced duct.
7(A). Ceiling Tile Kit (12") - GX484490-0770
(Make-up air) 24" x 24" Metal Ceiling Tile with 12-inch diameter opening and built-in flange. Includes 7-feet of 12-inch diameter white wire-reinforced duct.
Air Plenum - LAY84270-0020
White plastic plenum for return air to the condenser. Hinged for filter cleaning.
Condensate Pump Kit - LA484789-0090
220V pump kit includes 3/8" diameter x 20' length hose and installation hardware.
- Condensate Tank
Storage Cover - LAY84420-0700
Durable black nylon oxford unit storage cover.
Warm Air Flexible Duct Kit - LAY45820-0010
16" diameter wire-reinforced, the accordion-style duct in 25' length for condenser exhaust or evaporator intake. Includes clamp.
What size MovinCool Mobile Air Conditioner do I need?
(NOTE: 12,000 BTUs = 1 ton of cooling / 1 ton of cooling covers 400-500 sq ft)
Sizing up the proper equipment for your needs has many variables. If you're unsure about choosing the right Portable Air Conditioner for your particular situation please call one of our customer service reps at 1-800-237-9199. We'll help you decide what model is perfect for your applications. Once you've decided on a unit, it's important that we make sure our dedicated installation professionals have the right equipment for your specific installation needs. Please provide the following information when contacting us:
- In what city and state are you located?
- What is the application for the portable air conditioner?
- What is the square footage of the room (or area) you're trying to cool?
- What is the ceiling height? Is it a drop ceiling or a solid ceiling?
- How many people occupy the space being cooled?
- What are the electrical capabilities? (i.e.; 115V, 240V, 3 phase, single phase, etc.)
(Click here for NEMA Plug Configuration Chart)