The MovinCool Office Pro 63 High Capacity Spot Cooler is a Portable Air Conditioner for Large Scale Office Applications
Don't put your sensitive data and expensive equipment at risk! Large server rooms and offices with heat-generating electronics need reliable spot cooling. MovinCool's Office Pro 63 high capacity spot cooler provides instantaneous computer cooling without costly installation or expensive operation. At 60,000 BTU/hr - more than double the cooling power of the Office Pro 24 - the Office Pro 63 is the portable A/C for large-scale office applications.
As an ideal computer room air conditioner, the Office Pro 63 protects heat-generating equipment from expensive meltdowns that can stall daily operations and ruin capital assets, hurting your bottom line. As an ideal office air conditioner, the Office Pro 63 also keeps employees cool and protected improving office morale and maintain productivity. Best of all, the self-contained, portable Office Pro 63 is ready to cool from the get-go: just roll it in, plug it in and turn it on.
Air-cooled portable air conditioners are most often the system of choice for end-users and industry professionals looking for effective spot cooling systems. The fact that air-cooled portable air conditioning units can be installed almost anywhere - usually in minutes - explains their popularity as server room air conditioners, data center air conditioners, and cooling systems for a wide range of other applications. They can be used as a Temporary Air Conditioning System as needed.
MovinCool Office Pro 63 High Capacity Spot Cooler Features
- Operates on 460V power.
- Provides 60,000 BTU/hr of cool air - - Maximum spot cooling to just the room that needs it.
- No costly installation is necessary. Simply roll it in, plug it in, turn it on.
- Condensate pump included. Pumps water to remote drain for uninterrupted operation.
- 24/7 programmable modes.
MovinCool Office Pro 63 High Capacity Spot Cooler Technical Specifications
MovinCool Office Pro 63 List of Installation Accessories
Spot or Remote Cooling - This is the part of the portable spot cooler that COOLS THE AIR. To spot cool specific areas, use the nozzle adapter (1) in place of the standard louvers. Attach cold air ducts (4) or nozzles (2) to the adapter to cool remote hot spots. Trim rings (5) give a finished look and keep the ducts from unraveling. To improve efficiency, use the evaporator air plenum (11) to recirculate cool air.
Condenser Heat Removal - This is the part of the portable spot cooler that EXHAUSTS THE WARM AIR. The warm, humid air must exit the system somewhere... MovinCool makes removing exhaust easy. Simply replace the existing ceiling tile with the MovinCool ceiling tile kit (7). Place the flexible duct (12) on top of the unit and insert it into the ceiling tile.
Condenser Air Intake - This is where the room (warm) air goes into the portable spot cooler to be cooled. The air can be pulled without any attachments needed. However, when balanced airflow is required, attach the air plenum (8) with a duct (12) from the side of the unit to an outside air source. The air to the condenser is pulled from outside of the room to eliminate problems associated with negative air pressure.
(Accessories sold separately)
Exhaust duct required in most cases.
Nozzle Adapter Kit - LAY45770-0070
Three-piece metal frame converts airflow from louvers to nozzles or cold air ducts. Includes mounting screws. (Nozzles and ducts sold separately.)
1. (A) Duct Adapter Kit - LAY45770-0080
Same as above, but for use with cold air flexible ducts. Includes flange. (Cold air flexible ducts sold separately.)
- Nozzle Kit - 484209-0050
6" diameter white plastic nozzle that extends up to 2' in length. Includes flange, mounting screws and trim ring. (Purchase in sets of two.)
- Cold Air Flange Kit - 481170-0250
6" diameter white metal flange with wire clamp and mounting screws. Use with cold air ducts.
Cold Air Extension Duct - 481744-0030
6" adjustable diameter white plastic duct that extends from 6-1/2' to 10' in length.
4. (A) Cold Air Flexible Duct - LAY45810-0030
8" diameter wire-reinforced accordion-style duct in 25' lengths.
4. (B) Cold Air Self Supported Duct - LAY45810-0080
8"adjustable diameter white plastic duct that extends from 6-1/2' to 10' in length.
- Trim Ring - 481851-0210
6" diameter black plastic ring mounts as end caps for extension duct.
- (not shown)
- Ceiling Tile Kit - GX484410-8940
24" x 24" sheet metal tile with 16" hole for warm air flexible duct kit. Includes 7 ft. of 16-inch flexible duct.
- Condenser Air Plenum - LAY84270-0060
White plastic plenum for return air to the condenser. Hinged for filter cleaning.
- Condensate Pump Kit – INCLUDED WITH THIS MODEL
Condensate Tank - 484730-0010
Drain tank storage for condensation. Requires condensate float, sold separately. (For OP60/63 only)
10. (A) Condensate Float (not shown) - 484460-0010
Controls water level in condensate tanks. (For OP60/63 only)
Evaporator Air Plenum - LAY84270-0070
White plastic plenum for return air to evaporator.
11. Storage Cover - LAY84420-0710
Durable black nylon oxford unit storage cover.
- Warm Air Flexible Duct - LAY45820-0010
16" diameter wire-reinforced accordion-style duct in 25' length for condenser exhaust or evaporator intake. Includes clamp.
What size MovinCool Mobile Air Conditioner do I need?
(NOTE: 12,000 BTUs = 1 ton of cooling / 1 ton of cooling covers 400-500 sq ft)
Sizing up the proper equipment for your needs has many variables. If you're unsure about choosing the right Portable Air Conditioner for your particular situation please call one of our customer service reps at 1-800-237-9199. We'll help you decide what model is perfect for your applications. Once you've decided on a unit, it's important that we make sure our dedicated installation professionals have the right equipment for your specific installation needs. Please provide the following information when contacting us:
- In what city and state are you located?
- What is the application for the portable air conditioner?
- What is the square footage of the room (or area) you're trying to cool?
- What is the ceiling height? Is it a drop ceiling or a solid ceiling?
- How many people occupy the space being cooled?
- What are the electrical capabilities? (i.e.; 115V, 240V, 3 phase, single phase, etc.)
(Click here for NEMA Plug Configuration Chart)