MovinCool Office Pro 60 | Portable Computer Room Air Conditioner

The MovinCool Office Pro 60 Portable Computer Room Air Conditioner Provides 60,000 BTUs of Cooling

With up to 60,000 Btu/hr of computer cooling capacity (more than twice the cooling power of the Office Pro 24), the Office Pro 60 portable computer room air conditioner will provide spot cooling to large offices and computer rooms that contain heat-generating electronics. Your server room needs continuous and portable cool air to off-set the heat that these systems can generate. As an ideal server room air conditioner, the Office Pro 60 prevents computer networks, communications, and office equipment from shutting down when temperatures rise.

For large heat-producing electronics and computer server rooms, you need the best portable spot cooler. The MovinCool Office Pro 60 will protect your expensive equipment from over-heating and potential shut-down and can protect critical data from being lost with 60,000 BTUs of reliable cooling power.

The powerful Office Pro 60 portable computer room air conditioner can save you money while protecting your company's investment in equipment, employees, and customers. Self-contained and portable, the Office Pro 60 requires no costly installation - simply roll it in, plug it in and turn it on.

MovinCool Office Pro 60 Portable Computer Room Air Conditioner Features

• Operates on 220V power.
• Provides 60,000 BTU/hr of cool air - - Maximum spot cooling to just the room or area that needs it.
• No costly installation is necessary. Simply roll it in, plug it in, turn it on.
• Condensation pump included. Pumps water to remote drain for uninterrupted operation.
• 24/7 programmable modes.

MovinCool Office Pro 60 Portable Computer Room Air Conditioner Technical Specifications

Cooling Capacity	60,000 BTU/hr (95°F @ 60% RH)
Electronic Features	Programmable Control Panel Electronic Thermostat Control
Electrical	208/230V, 1 Phase | 6.6 kW | 29 Amps Recommended Fuse Size - 50 Amps Min/Max Voltage - 198 / 250
Power Cord	6 AWG (3-core) - 6 feet
NEMA Plug Configuration	6-50 - See Chart Here
Fan Motor Output (kW) (2-Speed)	Evaporator - 0.5 (H) / 0.33 (L) Condenser - 1.2 (H) / 0.93 (L)
Evaporator	Fan Type - Centrifugal Max Airflow - 1940 CFM (H) / 1700 CFM (L) Max External Static Pressure - 0.9 IWG
Condenser	Fan Type - Centrifugal Max Airflow - 2830 CFM (H) / 2650 CFM (L) Max External Static Pressure - 0.85 IWG
Compressor	Hermetic Rotary - 3.8 kW Output
Refrigerant	R-410A - 6.83 lb
Dimensions	30" (W) x 52" (D) x 64" (H)
Weight	Net - 623 lbs. | Shipping - 732 lbs.
Condensate Tank Capacity	Auto Pump Included
Operating Temperatures	65°F (min) - 105°F (max) @ 50% RH
Max Duct Length	Cold Duct Hose - 40 ft. Hot Duct Hose - 100 ft.
Sound Level	With Condenser - 69 (H) | 67 (L) Without Condenser - 71 (H) | 69 (L)
MovinCool Office Pro 60 Owner's Manual
MovinCool Office Pro 60 Product Spec Sheet
What's In The Box?	Office Pro 60 MovinCool Unit Product Manual
Warranty	MovinCool's Office Pro, Classic, Classic Plus, and Climate Pro models come standard with 1-year parts and labor coverage.  Registered products are eligible to receive full 3-year parts and labor coverage including the compressor.
NOTE:  All specifications subject to change without notice. All models feature compressor overload relay and fan motor protection. All models feature compressor short-cycle protection, return air thermostat, automatic restart and accommodate a condensate pump kit. All models are 50 Hertz (Hz) compatible with a slight performance decrease from the specifications listed above.

MovinCool Office Pro 60 Accessory List

Spot or Remote Cooling - This is the part of the portable spot cooler that COOLS THE AIR. To spot cool specific areas, use the nozzle adapter (1) in place of the standard louvers. Attach cold air ducts (4) or nozzles (2) to the adapter to cool remote hot spots. Trim rings (5) give a finished look and keep the ducts from unraveling. To improve efficiency, use the evaporator air plenum (11) to recirculate cool air.

Condenser Heat Removal - This is the part of the portable spot cooler that EXHAUSTS THE WARM AIR. The warm, humid air must exit the system somewhere... MovinCool makes removing exhaust easy. Simply replace the existing ceiling tile with the MovinCool ceiling tile kit (7). Place the flexible duct (12) on top of the unit and insert it into the ceiling tile. 

Condenser Air Intake - This is where the room (warm) air goes into the portable spot cooler to be cooled. The air can be pulled without any attachments needed. However, when balanced airflow is required, attach the air plenum (8) with a duct (12) from the side of the unit to an outside air source. The air to the condenser is pulled from outside of the room to eliminate problems associated with negative air pressure.

(Accessories sold separately)
Exhaust duct required in most cases.

1. Nozzle Adapter Kit - LAY45770-0070
   Three-piece metal frame converts airflow from louvers to nozzles or cold air ducts. Includes mounting screws. (Nozzles and ducts sold separately.)
   1. (A) Duct Adapter Kit - LAY45770-0080
   Same as above, but for use with cold air flexible ducts. Includes flange. (Cold air flexible ducts sold separately.)
2. Nozzle Kit - 484209-0050
   6" diameter white plastic nozzle that extends up to 2' in length. Includes flange, mounting screws and trim ring. (Purchase in sets of two.)
3. Cold Air Flange Kit - 481170-0250
   6" diameter white metal flange with wire clamp and mounting screws. Use with cold air ducts.
4. Cold Air Extension Duct - 481744-0030
   6" adjustable diameter white plastic duct that extends from 6-1/2' to 10' in length.
   4. (A) Cold Air Flexible Duct - LAY45810-0030
   8" diameter wire-reinforced accordion-style duct in 25' lengths.
   4. (B) Cold Air Self Supported Duct - LAY45810-0080
   8"adjustable diameter white plastic duct that extends from 6-1/2' to 10' in length.
5. Trim Ring - 481851-0210
   6" diameter black plastic ring mounts as end caps for extension duct.
6. (not shown)
7. Ceiling Tile Kit - GX484410-8940
   24" x 24" sheet metal tile with 16" hole for warm air flexible duct kit
8. Condenser Air Plenum - LAY84270-0060
   White plastic plenum for return air to the condenser. Hinged for filter cleaning.
9. Condensate Pump Kit - INCLUDED WITH THIS MODEL
10. Condensate Tank -  484730-0010
    Drain tank storage for condensation. Requires condensate float, sold separately. (For OP60/63 only)
    10. (A) Condensate Float (not shown) - 484460-0010
    Controls water level in condensate tanks. (For OP60/63 only)
11. Evaporator Air Plenum - LAY84270-0070
    White plastic plenum for return air to evaporator.
    11. Storage Cover - LAY84420-0710
    Durable black nylon oxford unit storage cover.
12. Warm Air Flexible Duct - LAY45820-0010
    16" diameter wire-reinforced accordion-style duct in 25' length for condenser exhaust or evaporator intake. Includes clamp.

What size MovinCool Mobile Air Conditioner do I need?

(NOTE: 12,000 BTUs = 1 ton of cooling / 1 ton of cooling covers 400-500 sq ft)

Sizing up the proper equipment for your needs has many variables. If you're unsure about choosing the right Portable Air Conditioner for your particular situation please call one of our customer service reps at 1-800-237-9199. We'll help you decide what model is perfect for your applications. Once you've decided on a unit, it's important that we make sure our dedicated installation professionals have the right equipment for your specific installation needs. Please provide the following information when contacting us:

1. In what city and state are you located?
2. What is the application for the portable air conditioner?
3. What is the square footage of the room (or area) you're trying to cool?
4. What is the ceiling height? Is it a drop ceiling or a solid ceiling?
5. How many people occupy the space being cooled?
6. What are the electrical capabilities? (i.e.; 115V, 240V, 3 phase, single phase, etc.)
   (Click here for NEMA Plug Configuration Chart)